The SIR Microfluorescent Linkable Lighting System is a fixture that comes in 7 different wattages, 7 different sizes and 7 different colors. The M-series is made out of aluminum . The lens cover has a fancy fluted clear design. This lighting stsyem can be linked together using various different connectors. You can link together any combination of lighting fixtures up to 200 watts per lighting chain. This lighting system is really amazing because it actually allows you to create the perfect lighting configuration to meet you lighting needs.

The Microfluorescent Lighting Fixture Facts:

Available in 7 different wattages and sizes

• 6 watts = 10.5"
• 8 watts = 15.5"
• 12 watts = 19.5"
• 16 watts = 21.5"
• 20 watts = 23.5"
• 24 watts = 35.5"
• 28 watts = 47.5"
• Widths and heights: 3/4" wide and 1.5" high

• Available color lamps:
  Warm White (2700k)
  Soft White (3500k)
  Cool White (4100K)
  Daylight(6400K)
  Blue
  Green
  Red

• Construction of Fixture: Aluminum housing with an on/off rocker switch and clear lens cover.

• Ballast: Each fixture has a small, silent, built-in ballast which provides instant on. These is no flickering.

• Standard carton contains. This fixture comes with the light fixture housing, a lamp, lens cover, 2 mounting brackets, 2 screws, a direct connector, and a powercord with rolling on/off switch.

• This fixture is non-dimmable

• Linkable upto 200 watts

• Available connectors:Direct connectors (no spacing between fixtures, 6" connectors (6" spacing), 12" connectors (12" spacing), 18" connectors (18" spacing), and 24" connectors. You can combine the different connecters together if you need longer lengths.

• High Color Rendering Index (CRI) of 82

• All Fixtures Are U.L. listed and C-U.L. Listed

• Powercords:6' long with rolling on/off switch. This switch allows you to turn on and off all the lighting fixtures in the chain at the same time (if so desired).

• How To Install: The system is very easty to install. Just mount both brackets into place with the provided screws and then just snap the fixture into both brackets. Plug one end of the powercord into the outlet and the other end into the fixture, make sure both switches (on the fixture and on the powercord) are turned on.

• Applications: Back lighting, cabinet lighting, cove lighting, counter display lighting, curio cabinet lighting, display case lighting, exhibit booth lighting, indirect lighting, light boxes, over cabinet lighting, sheltf lighting, showcase lighting, sign lighting, top of cabinet lighting, task lighting, utility lighting, vanity lighting, and window display lighting.

  Any questions? Call us toll free at 1-800-225-6113.